Trylon

Rigid plastic rectangular mould (85mm x 55mm x 30mm) for use with embedding resin.

Known as shallowcast resin is ideal for small water clear castings between 10-50g. Comes with a detailed instruction sheet. Use in a well ventilat...

Heat resisting (up to 315 degrees C) silicone rubber, two part moulding material. For low melt alloy casting.

Liquid latex dries to a semi transparent yellow colour when cured. Latex colourants can be added to the liquid latex to produce an opaque coloured ...

Latex Rubber is a liquid prevulcanised natural rubber for flexible mould manufacture. The moulds are ideally made by the dipping process but can al...

Latex Rubber is a liquid prevulcanised natural rubber for flexible mould manufacture. The moulds are ideally made by the dipping process but can al...

Latex Thickener can be added to Latex Liquid Rubber to make it thicker for dipping etc, addition rate about 10% - 100g to 1kg

Fine cell extruded polystyrene, very easy to shape and form using conventional hand tools. Dense Grade - For finer detail work.Please note sizing i...

Fine cell extruded polystyrene, very easy to shape and form using conventional hand tools. Dense Grade - For finer detail work.Manufactured in the ...

Opaque pigments to colour casting and embedding resin.

Polyester resin for casting. Comes with 20ml hardener. Note: Casting resin is for opaque casts only. Pigment, metal powders, colours etc. are avail...

To colour embedding resin.