Candlelight inside > Grey outside

Paraffin wax for candles. Melts at 58 - 60 degrees centigrade. Never leave wax unnattended on a heat source as danger if ignition. Not for use by c...

Wick holders to hold the wick in the bottom of a solid mould when there is no hole to thread it through (20mm diameter x 1mm thick, centre hole 2.5...

Please refer to the chart below to choose the correct wick size. The result will vary depending on scent/dye loads etc. You may have to wick up or ...

A large eye needle (length 101mm, eye 8mm x 1mm) to thread wick through rubber moulds.

Pure beeswax in handy pellet form. For among other things, making long lasting beeswax candles, adding to paraffin wax to improve the appearance of...

Latex mould suitable for use with wax, you will need to make a hole for the wick at the top of the mould. Height 300mm.

Natural palm based stearic acid. Add to paraffin wax for candlemaking, Helps to dissolve the dye and gives a hard shiny surface to the candle (100g...

Vybar 103. A useful additive to wax when casting in flexible moulds only. Aids opacity and increases burning time add 0.5% to wax.

A non-setting mastic that's consistency remains fairly constant with pouring temperatures up to 200 F and is not effected by water. It is very usef...

This kit contains all you need to make your own beautiful candles.Contents: Wax, Stearin, Wax dye,Scent Wick, Wicking needle, Mould seal, 4 mould t...

A two part ball candle mould 75mm internal diameter. Please note make sure this mould is well sealed with mould seal ( which can be reused) put al...

6 different moulds on one tray. For use with wax at 82 degrees or below.

This is the big one. Contains everything for the more experienced candlemaker including, Wax 2kg, Stearin 200g, Wax Dyes, Wick, Wicking Needle, Mou...

Candle Tray Mould 4 Designs

A Rigid plastic candle mould, 60mm diameter x 114mm high, the best value in candle moulds. For use with wax at 82 degrees or below. Do not use pe...

A Rigid plastic candle mould, 50mm x 50mm x 64mm high, the best value in candle moulds. For use with wax at 82 degrees or below. Do not use perfu...

A Rigid plastic candle mould, 120mm base diameter x 1100mm high, the best value in candle moulds. For use with wax at 82 degrees or below. Do not...

A rigid polycarbonate candle mould, 40mm diameter x 120mm high, stronger than the standard plastic candle moulds. For use with wax at 82 degrees o...

A Rigid plastic candle mould with base, 125mm x 65mm, the best value in candle moulds. For use with wax at 82 degrees or below. Do not use perfum...

A rigid polycarbonate candle mould, 70mm diameter x 185mm high, stronger than the standard plastic candle moulds. For use with wax at 82 degrees o...

A rigid polycarbonate candle mould, 53mm diameter x 170mm high, stronger than the standard plastic candle moulds. For use with wax at 82 degrees o...